An Easy Guide to Resetting All Skullcandy Wireless Headphone Models
It is necessary to reset your Skullcandy wireless headphone when your Earbuds stop functioning. If you’re encountering problems with your Skullcandy wireless earphones and are unsure what steps to take, resetting them may be the solution.
Resetting Skullcandy Wireless Earbuds is straightforward, especially if you have clear instructions. It is worth trying, especially if other troubleshooting methods have failed, as it will not worsen the situation or introduce new problems.
In this article, I will provide a clear and simple explanation of how to reset any model of Skullcandy wireless earbuds. By following these instructions, you will likely be able to pair them successfully with your device and each other.
How to Reset Skullcandy Wireless Headphone?
The process of resetting Skullcandy Wireless Earbuds can vary depending on the specific model, whether it’s Indy, Hesh, Jib, or any other model. To provide a quick and easy explanation, I will outline the general steps to reset Skullcandy Wireless Earbuds here. In the following sections, we will delve into more detailed instructions for each specific model of Skullcandy wireless earbuds.
How to Reset Any Skullcandy Wireless Headphone?
We wish I could offer a single, universal set of instructions, but the factory reset procedure for each model of Skullcandy earbuds differs slightly.
To simplify things, I have provided straightforward instructions for resetting each model. Find your specific Skullcandy earbuds model in the list and click the corresponding link to access the appropriate instructions.
How to Reset Skullcandy Crusher Headphone?
The Skullcandy Crusher headphones come with three buttons located on the right earcup. You need to press two of these buttons to reset the headphones simultaneously. Here’s a simple guide to follow:
- Turn on the headphones.
- Press and hold the top and bottom buttons together for 2 seconds. The “plus” and “minus” symbols indicate the buttons on the Skullcandy Crusher Wireless and Crusher 360 Wireless models, while the Skullcandy Crusher ANC Wireless and Crusher Evo headphones have round buttons.
How to Reset Skullcandy Riff 2 Headphone?
And here’s how to reset Skullcandy Riff 2 Wireless headphones:
- Power on your Riff 2 Wireless headphones.
- Long-press the “+” and “-” buttons simultaneously for 3 seconds. As a result, the LED lights will flash twice, indicating that the headphones have entered pairing mode.
How to Reset Skullcandy Riff Headphone?
Here’s how you can reset Skullcandy Riff Wireless headphones:
- Turn on your Riff Wireless headphones.
- Press and hold the main button and the “-” button together for 3 seconds. During this process, the LED lights will flash, and you will hear a voice prompt saying, “Disconnected.” After that, the headphones will enter pairing mode.
How to Reset Skullcandy Hesh Headphone?
To perform a reset on Skullcandy Hesh Evo and Hesh ANC headphones, you can follow these instructions:
- Turn on your headphones.
- Press and hold the primary and “–” buttons simultaneously for 3 seconds. As a result, the LED will flash in purple, a voice prompt will notify you by saying “Disconnected,” and the headphones will automatically enter pairing mode.
How to Reset Skullcandy Venue ANC Headphones?
If you are currently using the Skullcandy Venue ANC headphones from 2018 and need to perform a reset, you can use the following procedure:
- Turn on your headphones.
- Press and hold the “+” and “–” buttons on the right earcup until the LED light becomes a steady green. Afterward, power off your headphones and then power them on again. This action will cause the headphones to enter pairing mode automatically.
How to Reset Skullcandy Uproar Headphone?
f you’re seeking to reset your Skullcandy Uproar headphones, you’ve come to the right guide. Here’s how you can accomplish it:
- Turn on your headphones.
- Press and hold the “+” and “–” buttons located on the right earcup until you hear the voice prompt saying “Disconnected.” Once you hear that prompt, the headphones will enter pairing mode, and you should subsequently hear the voice prompt indicating “Pairing.”
How to Reset Skullcandy PLYR Headphone?
Resetting your Skullcandy PLYR gaming headphones is a simple process. Just follow these steps:
- Turn on your headphones.
- Hold the Power switch, which is situated on the left earcups, in the top position for 6 seconds.
How to Reset Skullcandy Icon Headphones?
The Skullcandy Icon headphones have a simple, discreet design with a single button. However, resetting these headphones can be confusing since there are no two buttons to press simultaneously.
Interestingly, you can only reset them while the headphones are being charged. Follow these steps to reset the headphones:
- Connect the USB charging cable to the headphones.
- Plug the other end of the cable into a laptop or wall charger. This will cause the LED light on the headphones to turn red.
- While the headphones are charging, press and hold the main button on the right earcup. As a result, the LED light will blink in blue and red colors.
How to Reset Skullcandy Dime Wireless Headphone?
The older Dime and the more recent Dime 2 models can be reset using this method.
To reset your Skullcandy Dime wireless earbuds, follow these steps:
- Remove the Dime earbuds from your phone, computer, or any other device by selecting the “forget” option.
- Open the case of your Skullcandy Dime earbuds and power them on.
- Choose either earbud and tap the back of it twice, then keep it still for at least two seconds. This will restore the Dime earbuds and put them in pairing mode.
- Once the Bluetooth is activated, you can reconnect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Indy Earbuds?
This is an alternative method to reset Skullcandy Wireless Earbuds. Here are the steps:
- Start by removing your Skullcandy Indy earphones from your phone, computer, or any other electronic device by selecting the “forget” option.
- Press and hold the back of each Skullcandy Indy earphone for at least 6 seconds to power them off.
- Similar to power them off, press and hold each earbud, but this time, keep holding them for at least 10 seconds.
- A red light should appear once your Indy earbuds are returned to their case. At this point, remove them from the case simultaneously.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Indy ANC Earbuds?
This method applies to all versions of Indy ANC earbuds, including the first-generation Indy ANC and Indy ANC Fuel. This is the third method to reset Skullcandy Wireless Earbuds:
- Start by removing your Skullcandy Indy ANC earphones from your phone, computer, or any other device by selecting the “forget” option.
- Power off the Indy ANC earbuds by touching and holding the backs of both earbuds for at least 6 seconds.
- Whether you clean each earbud individually or simultaneously, it doesn’t matter.
- Like powering them off, touch and hold each earbud, but this time, keep them for at least 15 seconds or until you see a solid blue light.
- To initiate the reset, give each earbud two taps on the back.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Jib Earbuds?
This is the fourth method to reset Skullcandy Wireless Earbuds, specifically for Jib Earbuds. It applies to all versions of Jib earbuds, including the first Skullcandy Jib and the latest Jib True 2:
- Start by removing your Skullcandy Jib earphones from your phone, computer, or any other electronic device by selecting the “forget” option.
- Power off the Jib earbuds by touching and holding the back of each earbud for at least 4 seconds.
- Like switching them off, touch and hold each earbud again, but keep them for at least 10 seconds.
- A red light should appear when you re-insert your Jib earbuds into their case. Simultaneously remove both earbuds from the case.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Mod Earbuds?
This method allows you to reset any Skullcandy Mod wireless earphones.
- Start by removing your Skullcandy Mod headphones from your phone, computer, or any other device by selecting the “forget” option.
- Please take off the cases from both earphones and power them on.
- Simultaneously touch and hold the backs of both earphones for at least three seconds.
- The earbuds will automatically enter pairing mode once you see three purple flashes and hear a tone indicating the reset.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Push Active Earbuds?
Only the Skullcandy Push Active earphones can be reset using this method. Refer to the instructions above for resetting the Push Original and Push Ultra earphones.
- Start by removing your Skullcandy Push Active headphones from your phone, computer, or any other device by selecting the “forget” option.
- Take out the case from the Push Active earphones.
- Only the rear of the right earbud should be touched and held for three seconds.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Push Earbuds?
This method can reset the original and Push Ultra earphones for Skullcandy Wireless Earbuds. The instructions below apply specifically to the Push Active model.
- Start by removing your Skullcandy Push earphones from your phone, computer, or any other electronic device by selecting the “forget” option.
- Turn off your Skullcandy Push earbuds by touching and holding the back of each earbud for at least six seconds.
- Similar to power them off, touch and hold each earbud again, but this time, keep holding them for at least 10 seconds.
- Press the power button on the left earbud to initiate pairing mode for the Push earbuds.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Sesh ANC Earbuds?
The Sesh ANC (active noise cancelling) earphones can be reset using this method to reset Skullcandy Wireless Earbuds. Refer to the instructions provided above for the Sesh and Sesh Evo earphones.
- Start by removing your Skullcandy Sesh ANC earphones from your phone, computer, or any other device by selecting the “forget” option.
- Remove the cases from both earphones and power them on.
- Touch and hold the backs of both earphones simultaneously for at least three seconds.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Sesh Earbuds?
The Sesh and Sesh Evo earphones can be reset using this method to reset Skullcandy Wireless Earbuds. These instructions are specifically for earphones with Sesh ANC (active noise cancellation).
- Start by removing your Skullcandy Sesh headphones from your phone, computer, or any other device by selecting the “forget” option.
- Touch and hold the rear of each Skullcandy Sesh earbud for at least 4 seconds to turn them off.
- Just as you did to power them off, touch and hold each earbud again, but keep holding them for at least 10 seconds this time.
- You should see a red light when you place your Sesh earbuds back into their case. Remove them simultaneously with the red light.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Spoke Wireless Headphone?
This is another method to reset Skullcandy Wireless Earbuds, specifically for Spoke earbuds. Follow the steps below:
- Start by removing your Skullcandy Spoke earphones from your phone, computer, or any other device by selecting the “forget” option.
- Touch and hold the back of each Skullcandy Spoke earphone for at least 4 seconds to turn them off.
- Like powering them off, touch and hold each earbud again, but keep holding them for at least 10 seconds.
- A series of flashing lights will initially appear, followed by a solid red light. Remove your Spoke earbuds from the case while the red light is displayed.
- With Bluetooth turned back on, you can now connect your phone, computer, or other devices as you normally would.
How to Reset Skullcandy Vinyl Wireless Headphone?
You can use this method to reset any wireless Skullcandy Vinyl earphones for Skullcandy Wireless Earbuds.
- Start by removing your Skullcandy Vinyl earphones from your phone, computer, or any other device by selecting the “forget” option.
- Turn off your Skullcandy Vinyl earphones by touching and holding the back of each earbud for at least 4 seconds.
Conclusion
Skullcandy provides a convenient solution for a diverse user base by offering a variety of wireless earbud models that cater to different consumers. However, this extensive range of models can make finding specific instructions for resetting your particular model difficult.
We hope this article has guided you in finding the correct procedure to reset your Skullcandy wireless headphones. You can now address any audio or connectivity issues with confidence.
Did the steps we provided work effectively for your specific model? If you believe we may have overlooked any important details, please share your feedback in the comments section.
