Amplifier
Reading Time: 5 minutes

How to Connect DJ Mixers to an Amplifier!

A career in DJing is as lucrative as it sounds. If you are a music lover and passionate enough to make any party a blast, you have the potentials to be a DJ! However, nothing is easy, and even DJing requires hard work.

To be more skillful, you need to know what to connect with what and bring music to life. You may already know how to connect DJ controllers or having the right kind of cable. Nonetheless, you must know how to connect DJ mixers to an amplifier.

There specific purposes for DJ mixers and amplifier which can help you understand how to use those efficiently. These are nothing but important types of equipment that can help you flourish in this field. To do so, you must learn to differentiate between DJ tools, including these. 


What do You Understand by Amplifiers?

For transmitting signals and to create wireless communication, amplifiers get used in several audio devices. They accept electrical signals and then broaden and intensify the signal accordingly. To be more specific on how amplifiers work: They obtain input signals from sources and then output an extended one of the received initial signal. To connect to a loudspeaker, they potentially extend much. Usually, amplifiers use generally 110 volts for a power signal.


Why will You Need an Amplifier?

There can be amplifiers of different constructions and features. For example, a voltage amplifier, power amplifier, trans resistance amplifier, transistor amplifier, instrument amplifier, and many more.

However, no matter how many differences there are, every amplifier works similarly. An amplifier is consists of three necessary connections: source input, speaker output, and a 110-volt wall socket.

An amplifier accepts a signal (electric or powered), and that is generally sent through 110 volts. After that, the power signal is directed towards the power supply, where the power gets transformed to direct current. That current is then delegated towards a volatile resistor, often referred to as a transistor.

The input source’s signal quantity determines the signal amplitude and how rapidly the transistor operates compared to the input signal frequency.

You can use a volume control similar to a potentiometer to get a sound with the amplifier. This will allow you to monitor the current and control the sound’s frequency.

You can get Top 10 Power Amplifier in 2021


What are DJ Mixers?

With mixers, you can adjust audio signals’ output, where multiple audio signal inputs can be arranged subtly. They are often used to change the audio output’s tone level for making it easier to listen. Likewise, with amplifiers, you will need different types of mixers such as digital mixers, analog mixers, powered mixers, and audio mixers.

The digital mixer process audio signal’s inputs and can use processing technologies of the digital signal to change the sound and volume. On the other hand, with analog mixers, you cannot control various tones. However, you can easily understand the signal flow as an analog speaker adjusts volumes and tones using input audio signals.

Although powered mixers are similar to analog mixers, they are consisting of power amplifiers integrated into them. Without any hassle, you can play music when the mixer is precisely attached to the speaker.

Now: audio mixers refine along with filter sounds by changing speeds. The purpose of using this mixer is to take more than one audio signal to send maximum signal outputs and combine them. Audio mixers also improve effects, equalize sounds, record mixers, and create control fields.

Also, check out: Top 10 Digital Mixer in 2021 and Top 10 3 Channel DJ Mixer in 2021


How to Connect DJ Mixers to an Amplifier

Now that you can differentiate between a mixer and amplifier, it’s time to learn how you can connect the two easily and quickly. With some simple steps that can be done in no time.

Step 1 

You need to unplug and shut off all equipment types out of all electrical connections to prevent short circuits or noise.

After that, place the speaker in a suitable location you prefer, spread out the speaker’s cable, and straighten it. To prevent falling or unwanted accidents, make sure that no excess cables are near the speaker.

Step 2

Attach the plugs to the audio mixer’s outer jacks. You will find this jack on the right side of the back component. You need to attach the left cable into the ‘L’ jack and the right cable to the ‘R’ jack on the mixer component’s back.

Nonetheless, you will find mixers that come with monitors. If your DJ mixers have monitor systems, you can insert one cable to the ‘L+R’ jack. You will also find a mixer switch that helps you choose the monitor’s use and the speakers’ use. 

Step 3 

After that, just as you did in stage 2, you need to put the connectors to the further end of your mixer and into the IN audio jack amplifier. The white cable is for the left-sided jack, and the red cable is for the right-sided jack. When you subsequently insert the cables, ensure that those are strongly connected. 

Step 4

When you are done with the above steps, connect the speaker’s power cord. After that, plug that with a powered outlet. Push the mixer and speaker’s turn button. Ensure that the selector knob of the amplifier is adjusted and attached to the powered mixer in the IN jacks set of the audio. You can then change the amplifier’s volume to whatever level, frequency, and pitch you desire.   

Step 5 

Now, for the last step, thoroughly check the connections and volume controls. When the amplifier gets connected with speakers and you are getting audio signals through your mixer, you can assure that everything is going well.


That is a quick brief on how to connect DJ mixers to an amplifier. You just need to follow the steps and put your creativity together. If you keep practicing, you might find better ways to connect your DJ equipment and deliver better performances.

You may want to read: How to Connect DJ Mixers to Speaker!

Leave a Reply

Your email address will not be published. Required fields are marked *