DJ Controller
Reading Time: 5 minutes

How to Connect a DJ Controller to a Speaker

With the term DJ controller, there comes much confusion, especially on how you can connect that with speakers. However, it is not that much harder than it may sound. DJ controllers are one of the must-haves for a beginner or even if you have mastered it. So what’s the bottom line? A DJ controller is modern, technologically advanced, and far better than conventional turntables.  With it, you can mix your music using software such as jog wheels, faders, knobs, encoders, backlit buttons, touch strips, and so on. 

How to do it? A few cables are needed to connect the DJ controller to the speakers. A balanced XLR or TRS cable requires some common cables, and most DJ controllers operate for these alternatives. Other specifications, of course, involve a power supply, but the setup is not too difficult.

You can also read How to Connect DJ Mixers to an Amplifier!

What Tools do You Need before?

Whatever you do, you will always need the right types of equipment to get things done. The same thing goes with DJ controllers. That way, you can make sure that all the connections are right, and you won’t have to think about looking for important equipment later. To connect a DJ controller with a speaker, you don’t need a ton of tools but a few ones. 

  • A good DJ controller is the first thing you need, of course. If you are a beginner, do not go for an expensive one, rather start with some basic and budget-friendly ones. However, you can slowly upgrade the features once you gather much knowledge. 
  • The second thing you will need is a good set of speakers. You might not have a choice of speakers, but it is crucial to be acquainted with a few styles. 
  • In terms of speakers, you have can either use a powered or passive speaker. Powered speakers come with an amplifier. However, if you want to use passive speakers, you will need separate amplifiers.
  • You must also get an audio interface because, without it, no one will hear music! 
  • When using a DJ controller, a laptop and DJ software are also required. Your controller will not be able to do its work without them.
  • Finally, make sure that you have the right cables and adapter compatible with the speakers you have. Without maintaining this, it will be difficult for you to connect everything.

Also, check out: Top 10 DJ Controller 2021

Should You Get a Powered or Passive Speaker?

It completely depends on your personal preferences. As mentioned earlier, powered speakers have built-in amplifiers and run with electricity. That means this type of speaker is directly plugged into the wall. On the other hand, to use a passive speaker, you need to get an external power amplifier, which can cost you a bit more. 

Generally, powered speakers are more convenient as you do not another extra setup. Those speakers can be directly plugged in with your DJ controller.  

Connecting a DJ Controller to Powered Speakers

No matter what type of controller you choose, you will get a smooth experience with a powered speaker. Because of the simplification, you can work quickly and easily with this type of speaker. 

For the music to connect with speakers, you need to have an audio interface that you can attach to the speakers. 

Ensure what sort of cable you need, such as an XLR or a phono cable to connect the audio interface. Also, in the audio interface, plug the cable’s correct end and the other into the speaker.

You must make sure to keep the speakers shut off or removed from electricity when you plug in the audio interface. That way, if anything goes wrong, you won’t risk destroying your equipment.

It’s easy enough to connect the powered speakers, but you need to make sure all the cables are attached in the right places. That will not only allow your music to come through, but it will also save you and your equipment from possible damage.

You might want to read about Essential DJ Equipment

Connecting a DJ Controller to Passive Speakers

Whether you like passive speakers or not, knowing how to use them is important. Though you will need a couple of extra steps to set up your whole gig, it’s worth knowing everything.  

You need to make sure that you know where the multiple jacks are placed on your amplifier, as on the other DJing equipment. That way, you can easily and securely link those together. One of the best parts about passive speakers is that you are less likely to get harm or having equipment damage. 

Nonetheless, ensure that you have the right cables available to connect those with your equipment. Also, you need to get an audio interface, a speaker, and an amplifier for the passive speaker. Be careful when you are going to connect the speaker with the amplifier with cables. 

However, to link the amplifier to your audio interface, you will need another cable, whether an XLR or an RCA.

Installation Needed to Your Laptop

After getting the speaker type, it’s time to set up your laptop. There is quite a few special DJ software that is compatible with laptops. Although you can use other software, choosing the one provided with your controller would guarantee that they fit together. You can attach your laptop to your DJ controller until you install the compatible software on your device. However, your laptop needs to be up to date and connected with the right cables. Check thoroughly if your DJ controller uses USB cables. 

That is a quick brief on how to connect a DJ controller to a speaker. It’s not that hard, but you will need the right types of equipment. Always be careful when you are plugging anything to protect yourself and your gears from any harm or electric issues. Remember that the more you will practice, the better you will be

You may want to read How to Connect DJ Mixers to Speaker!

Leave a Reply

Your email address will not be published. Required fields are marked *